Copyright © 2017 JN compressor.com All Rights Reserved.
The compressor is used to compress air and output, and the compressor can also compress the gas, which is released under pressure.
In the design of a screw compressor, there are two screw rotors - a male rotor and a female rotor (ie active rotor and driven rotor). The drive rotor can be connected to the engine of the compressor either directly or through a gear. The drive rotor can be distinguished from the guide by a cavity and a cut. The female rotor has a recess and a convex cut is applied to the drive rotor. The rotor is housed in a metal casing and is mainly made of cast iron or steel. The housing is provided with holes for bearings, screws and seals, and the housing also has an injection or suction chamber for air or gas which is then pressed into the air reservoir for use.
Screw compressors are also oil-filled or oil-free.
The advantage of using a screw compressor is that the use of a screw compressor is now considered to be the best and most effective solution for providing compressed air. They do not require additional installation and installation investment; sustainable development and desired operation; efficient cooling system (oil) for 24/7 operation at optimum temperatures; reliable; no need to install large capacity receivers; manufactured by Taurus Industrial Equipment The life of a screw compressor is much higher than other types of compressors; it is cheap; it is resistant to overheating; no special maintenance and installation is required; energy is saved; noise is low; at the exit of the compressor, air is cleaner than other types of compressors.
All modern compressors have an automatic control system. Due to its numerous advantages, screw compressors are rapidly replacing analogs of other types of compressors. The screw compressors produced by Jinniu Industrial Equipment Co., Ltd. are available in a full range of models to meet the needs of screw air compressors in various industries. In addition, Jinniu Industrial Equipment's screw compressors have a strong technical research and development team and after-sales service, so that customers have a strong guarantee when using screw air compressors.